ASCOM OFFICE 130PRO User's Guide download pdf (Page 54)

Personalizing Your Phone

Formulating Functions

This section explains how to activate an individual function, for example call forwarding unconditional,

with the aid of function commands and how to assign it to a key.

Function under a Foxkey

You want to know the status of a function stored under the Foxkey.

Certain functions are shown with a check mark on the display when the function is activated:

• T visible to the left of the function name: Function is activated.

• T not visible: Function is deactivated.

Function Commands

You can use function commands to define a function to suit your personal requirements. A function can

consist of one or more function commands, function codes, and the phone number. You can either carry

out a function directly or store it under a key (select function "configurable").

The following function commands are available (see "Entering characters"):

Examples of how to define a function:

"I" Seize line

"X" Disconnect

"P" Pause 1 second before the next operation

"N" Use the phone number entered in call preparation

"." Control key function

"Z" Activate / deactivate DTMF mode

"R" Use the phone number last dialled

"Y" Disconnect and reseize the line.

"IR" Seize line ("I"),

dial phone number last dialled ("R")

"I201" Seize line ("I") and dial phone number 201

"I*21201X" Seize line ("I"),

activate call forwarding unconditional ("*21") to phone number 201,

disconnect ("X")

Note

Text mode has to be activated before you can enter function commands.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 82 83

No comments

ASCOM OFFICE 130PRO User's Guide Page 54